ÃÛÌÒ´«Ã½Æƽâ°æÏÂÔØ

This study was conducted for Northern Pipe Product Inc., Fargo, ND, and presents test results from a program to investigate the axial performance of nominal 6-in. (150-mm) diameter polyvinyl chloride (PVC) pipe and joints with reinforced gaskets.The

The Test Report can be found here: Service Life Assessment of Internal Replacement Pipe: External Load Testing of Generic Epoxy Material REPAIR Project Page

The Test Report can be found here: Service Life Assessment of Internal Replacement Pipe: External Load Testing of I-MainTM REPAIR Project Page

This document reports on a testing program performed on 12-in.- (300-mm) diameter specimens repaired with ALTRA10TM internal replacement pipe (IRP). Five specimens were tested, including those with steel (4) and CI (1) host pipes.

Project Title: Testing and Analysis of Pipeline Encapsulation TechnologiesFunding Agency: DOE/ARPA-E: Rapid Encapsulation of Pipelines Avoiding Intensive Replacement (REPAIR)Lead: University of Colorado BoulderPartners: University of

The intent of this study is to define the seismic response of iPVC pipeline systems with couplings and to illustrate procedures for interpreting laboratory results to seismically classify pipeline system performance following developing ASCE seismic guidelines.

The intent of this study is to impose external loading conditions to test specimens that are representative of the significant deformations possible during earthquake-induced ground motions such as landsliding, fault rupture, and liquefaction-induced lateral spreading, characterizing the pipeline system capacity.

Report by H.L. Parnell, L. Guerrero, B.A. Lucero, and B.P. Wham.

The first in a series of testing programs at ÃÛÌÒ´«Ã½Æƽâ°æÏÂÔØ CIEST investigating performance of critical lifeline systems under extreme loading conditions.